Skip Navigation Website Accessibility



 
5910 Duraleigh Road Suite 139
Raleigh, North Carolina 27612

Monday-Friday 10-5
Saturday 10-3
Sunday Closed

FIND US ON...

Husqvarna Viking Club



Are you a Husqvarna Viking Owner?  Any Husqvarna Viking model is welcome! Classes will alternate between sewing and embroidery projects so all members will have a chance to come to class and complete a fun project on their Husqvarna Viking machine!

When: Last Tuesdays of the Month

Pay Attention to any prep work, especially for embroidery classes. Embroideries will be stitched out at home before class. Allow time to do that as some embroideries will take time to stitch out.

When you sign up for an embroidery class, you will receive an email with the embroidery design and embroidery instructions. Hoop requirements for class are listed next to the class.

Class closes 5 days beforehand. Make sure to sign up early!

*All classes will require students to bring their sewing machines to class*

August 27- Humbug Texture Class- Embroidery Class (200x 200 Hoop). Embroidery will be done at home. Sewing Portion of the project will be done during Club time.





2 pieces 9 x 13 cotton fabric ( low volume as we will be "texturizing" the bag)
1 piece 9 x 13 fusible fleece
1 piece 9 x 13 pellon sf101 or form flex
scrap piece of fabric at least 2 x 5 for tab on top
12 in or longer zipper ( will cut to size)
2 packages of ButtonUp Buttons ( can be found in store)
3 Hole Yarn foot or 7 Hold Cord Foot ( can be found in store if you don't have one)

Embroidery Thread (and bobbin with matching color)
Water Soluble Stabilizer or Mesh Soluble Stabilizer
Embroidery will be sent to you the email you provide with you sign up along with Embroidery Instructions which will have to be completed before coming to class.




September 24- Scrumptious Stitches Table Runner- Sewing Class




Fabric Needed

  • 1 ½ yards of solid fabric for decorative stitching and backing

  • 1 yard of print for front and binding ( a 19 inch cut will be used for the front of the table runner)


Prepare Your Fabric!


From Solid Fabric

-Cut Three 3” x 16” strips

-Cut Two 6” x 16” for inset strips

-Cut 46” x 16” for Backing ( I ended up piecing the backing with a scrap)

-Batting about same size as backing


From Print Fabric

-Cut Four 3” x 14 ½” strips

-Cut Two 14 ½” x 12” for Curved Ends of Table Runner (Template will be provided)

-110” of 2 ½” wide binding

Sewing- To Bring to Class

 

  • All Fabric and Batting  mentioned above- cut to correct sizes

  • Pictogram Pen or Frixion Pen

  • Multi Line Decorative Foot

  • Walking Foot and Changeable ¼” Guide Foot

  • Sewing Machine (foot pedal, power cord, extra bobbins if needed and favorite sewing supplies)

  • Regular Sewing Foot (I used the B Foot)

  • Side Motion Foot S ( if your machine has Side Motion Stitching)

 

  • Optional: 3 Hole Yarn Foot OR 7 Hole Cord Foot ( will be available if you want to try out this technique)

 

  • Embroidery Thread and Regular Sewing thread for decorative stitching and stitching binding around edges

  • Bobbin thread

  • Wonderclips and Straight Pins- both will be used to keep all layers of fabric together while quilting and putting on the binding. 

  • Ruler, Rotary Cutter

  • Iron - optional but if you prefer your own iron, bring it. There will be an ironing station set up in class.

 





October 29- Mosaic Clutch * Embroidery Class (200 x 260 Hoop). Embroidery will be done at home. Sewing Portion of the project will be done during Club time. The Embroidery and Embroidery instructions will be sent to you when you sign up for class.




Fabric Requirements:

Fabric- Vinyl ( I used Marine Vinyl from JoAnn Fabrics). 

  • Two 13” x 13” inch (outer). Does not have to be a perfect cut. We will trim down later.

  • Two 2” x 10” (facing)


Fabric- Cotton

  • Four 8” x 1 ¾” ( zipper panels)

  • Two 6 ¾” x 10” (lining)

  • Two 2” x 4” (zipper tabs)





November 26- Bow Clutch with Strap- Sewing Class






HV Club will continue in 2020! Stay Tuned!


Skill Level: intermediate
Skill Details: Student should be comfortable using their machine, troubleshooting basic issues, loading an embroidery and setting up to embroider.
Requirements: Must own a Husqvarna Viking sewing/embroidery machine. Students will be required to supply their own materials for class. Supply and Prep List will be emailed and Students will be responsible for completing all prep work at home before coming to class to complete the project. Unless otherwise stated, all embroidering will be done at home. If a student needs assistance with the embroidery portion, they should contact Amanda and schedule an appointment.
Instructor: Amanda
{{getPrice()}}

{{model.event.first_date}} - {{model.event.last_date}} {{model.event.sections.length}} Sessions {{model.event.sections[0].time}}
{{s.date}} {{s.time}}

Seats available {{model.remainingSeats()}}

{{errorMessage}}

{{waitlist_contact_errorMessage}}

Included Materials


{{c.items[0].title}}

{{c.errorMessage}}

This class cannot be purchased online. Please contact the store for more information.